| Product Name | SKF motor encoder |
| Model | BMD-6206/064S2/UA008A
BMD-6206/064S2/UA108A |
| Bearing outside diameter D |
62mm |
| bearing inner diameter d | 30mm |
| Height of the bearing B | 16mm |
| Height of the bearing B1 | 22，2mm |
| Used for | Suited for most AC induction motors |
Features
1）Bearing and sensors integrated into a single unit
2）Enables monitoring of speed and direction of the shaft
3） Accurately detects speeds from 0 to 13 000 r/min depending on limiting speed of bearing
4） Wide range of cable length and connectors available
High-performance filtering
All standard SKF Motor Encoder Units are protected with high-performance filtering,
so they can adapt to the electric environment typically found in industrial and automotive applications.
Typical diagram
Requirements for the receiving interface
The receiving interface must be able to process the signals, which are provided via open collector circuits.
A typical schematic drawing is shown in fig. 1
Resistors
Pull-up resistors should be placed between the voltage supply and the conductors for the output signals to limit the output current to 20 mA.
Recommended pull-up resistors for typical voltage supply values are listed in table 1.
SKF MOTOR ENCODER TABLE
SKF MOTOR ENCODER SHOW
